Proudly featured on the cover of the March 2018 issue of
Nuts and Volts magazine!
I'm having some trouble keeping the kit in stock since the Nut and Volts article came out. If I'm out of stock, try ordering from the Nuts and Volts store at
Thank you for your patience and understanding!
After a bit of a slow start, I have finished making the adjustments to the frame. It will be 1/8″ (3mm)thinner, which may not seem like much, but it brings the tops of the larger LEDs flush with the face of the frame. The rounded edges of the frame will have a larger radius, to give it a more sleek and rounded look. The back side will have a couple of modification as well that will aid in its manufacture. I needed to start with the frame as the changes will have an effect on the PC Board’s size and location of mounting holes.